 |
by OWI
FREE SHIPPING within Contiguous U.S.
Get it between and .
Item #: OWI-535-USB
1 in stock
Description
The Robotic Arm Edge, a Dr. Toy 2008 Best pick, gets a much-anticipated accessory with the introduction of the USB Interface Kit. Now robot lovers can connect the Robotic Arm Edge to a PC and have real time manual control of the robotic arm and program the arm to perform a sequence of movements - just like an actual robot on an assembly line. The USB Interface Kit comes complete with a CD, printed circuit board, USB cable and accessories, and a detailed instruction manual. HARDWARE and SYSTEM REQUIREMENTS OS: Windows XP (SP 1,2,3), Vista and Windows 7. 64-bit Windows is now supported and can be downloaded here CPU: Pentium3, 1.0GHz or higher Memory: 256MB or higher Hardware Disk Space: 100MB or more Display: Super VGA (800 x 600 or higher). Color monitor with high
Bar Stool Guide
If you have the below table, bar, or counter height, please get the chairs or stools with the following height:
Table 28" to 30" H --------- Chair 17" to 19" H
Counter 35" to 37" H ----- Stool 23" to 28" H (Counter Height Stools)
Bar 41" to 43" H ----------- Stool 29" to 32" H (Bar Height Stools)
Bar 44" to 47" H ------------Stool 33" to 36" H (Extra Tall Bar Stools)
There should be an 11" to 13" space between the seat of the stool or chair and the table surface.
To determine how many stools you need to fit your bar or counter, measure the length of the bar in inches and divide by 24. You should allow 24" of counter length per stool, with or without a back. Example: You would need four stools for an 8' counter.
Questions & Answers
Have a Question?
Be the first to ask a question about this.