 |
by Intellinet Network Solutions
FREE SHIPPING within Contiguous U.S.
Item #: PTR-ICI524179
Ship Weight: 0.9502 lb
Description
Reduce costs by using existing Cat5 cable to provide both power and data. The INTELLINET NETWORK SOLUTIONS Power over Ethernet Injector allows you to connect your IEEE 802.3af-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af powered device (PD) to a switch. Reduce Wiring Costs No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing Cat5 cabling to deliver DC power as well as transfer data. Preserve Existing Investments Does your existing LAN switch not support the new IEEE 802.3af PoE standard? Well, don’t let that stop you from realizing the benefits of delivering DC power over the existing Cat5 Ethernet cabling. Use the Model 503389 PoE Injector until you are able to upgrade your LAN switch to a model that supports the IEEE 802.3af PoE standard. Protect Your Equipment Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that the products are protected from power problems. The PoE Injector was designed to protect equipment from short circuits (short GRND), current overloads (over 450 mA) and high voltages (voltage exceeding 52 V).
Features:- Reduces Costs By Using Existing Cat-5 Cable To Provide Both Power & Data
- Injector Can Be Used To Connect A Wireless Access Point, Ip Phone, Network Camera Or Any Ieee 802.3af Poe Powered Device To A Switch
- Designed To Protect Equipment From Short Circuits (short Grnd), Current Overloads Over 450ma & High Voltages Exceeding 52v
- Dimension: L 7.8 X W 4.7 X H 3.7 in.
- Shipping Weight: 0.95 lbs
Bar Stool Guide
If you have the below table, bar, or counter height, please get the chairs or stools with the following height:
Table 28" to 30" H --------- Chair 17" to 19" H
Counter 35" to 37" H ----- Stool 23" to 28" H (Counter Height Stools)
Bar 41" to 43" H ----------- Stool 29" to 32" H (Bar Height Stools)
Bar 44" to 47" H ------------Stool 33" to 36" H (Extra Tall Bar Stools)
There should be an 11" to 13" space between the seat of the stool or chair and the table surface.
To determine how many stools you need to fit your bar or counter, measure the length of the bar in inches and divide by 24. You should allow 24" of counter length per stool, with or without a back. Example: You would need four stools for an 8' counter.
Questions & Answers
Have a Question?
Be the first to ask a question about this.